INVT Goodrive350 Series Operation Manual page 269

Goodrive350 IP55 High-ingress Protection Series VFD
Function
Name
code
Programmable card
P27.27 save function at
power off
Group P28––Master/slave control
Function
Name
code
P28.00 Master/slave mode
Master/slave
P28.01 communication
data selection
Master/slave
P28.02
control mode
Description
0: 0+24+60
1: 12+24+60
2: 24+24+60
3: 36+24+60
4: 48+24+60
5: 60+48+60
6: 72+24+60
7: 84+24+60
8: 96+96+96
Tens place: Card that communicates with the
programmable card through PZD (valid only
when the ones place of P27.26 is 5)
0: DP card
1: CANopen card
2: PN card
Note: P27.26 can be changed at any time, but
the change will only take effect after the
re-power on.
0–1
0: Disable
1: Enable
Description
0: Master/slave control is invalid.
1: The local device is the master.
2: The local device is the slave.
0: CAN
1: Reserved
0x000–0x112
Ones place: Master/slave
selection
0: Master/slave mode 0
(The master and slave adopt speed control and
maintain the power balance by droop control.)
1: Master/slave mode 1
-251-
Function parameter list
Default
Default Modify
running mode
0x001
Modify
◎
1
◎
0
◎
0
◎