INVT Goodrive350 Series Operation Manual page 3

Goodrive350 IP55 High-ingress Protection Series VFD
No.

Revised the nameplate diagram in section 3.4.

Updated fuse symbols in all circuit diagrams.

Modified the U-shaped jumper position in section 4.4.2,
and added cautionary notes.

Added a selection table for the flat keypad cable in
section 5.2.

Updated the diagram for sections 5.5.2, 5.5.5, 5.5.6,
5.5.14, 5.5.15, and 5.5.16.

Adjusted the depiction in section 5.5.8.

Updated the description for function codes P05.01–
P05.06 option 43, revised the explanations for P00.03
and P06.05, updated the depiction for P09.08, and add
6 cautionary notes for P18.00.

Modified the UPE fault explanation in section 7.5.1.

Removed the Modbus RTU command code: 08H,
diagnostic function.

Added the expansion card order number and updated the
card models in Appendix A: removed EC-TX504, added
EC-TX510B; and updated EC-TX503, EC-TX505C,
EC-TX509 to EC-TX503D, EC-TX505D, EC-TX509C.

Updated the indicators and descriptions in sections A.7.4
and A.7.5.

Updated the diagram and descriptions in section D.2,
modified sections D.6 and D.7.

Revised the data in Table D-4.
Change description
Change history
Change
Version
date
December
V1.5
2024