INVT Goodrive350 Series Operation Manual page 147

Goodrive350 IP55 High-ingress Protection Series VFD
Function
Name
code
AVR function
P00.16
selection
P00.17 VFD type
Function parameter
P00.18
restoration
Group P01––Start and stop control
Function
Name
code
Running mode of
P01.00
start
Description
3: Static autotuning 2 (partial autotuning)
When the present motor is motor 1, only
P02.06, P02.07, and
when the present motor is motor 2, only
P12.06, P12.07, and
4: Rotary autotuning 2
It is similar to rotary autotuning 1 but only valid
for AMs.
5: Static autotuning 3 (partial autotuning)
It is valid only for AMs.
0: Disable
1: Valid during the whole process
The auto-adjusting function of the VFD can
eliminate the impact on the output voltage of
the VFD because of the bus voltage fluctuation.
0: G type
1: P type
0: No operation
1: Restore default values
2: Clear fault records
3: Reserved
4: Reserved
5: Restore to default values (factory test mode)
6: Restore to default values (including motor
parameters)
Note: After the selected operation is performed,
the function code is automatically restored to 0.
Restoring the default values may delete the
user password. Exercise caution when using
this function.
The option 5 can be used only for factory
testing.
Description
0: Direct start
1: Start after DC braking
-129-
P02.08 are autotuned;
P12.08 are autotuned.
Function parameter list
Default Modify
○
1
◎
0
Default Modify
◎
0