INVT Goodrive350 Series Operation Manual page 214

Goodrive350 IP55 High-ingress Protection Series VFD
Function
Name
code
Fault severity group
P11.49
Fault severity group
P11.50
Action for fault
P11.51
pre-alarm
Frequency
P11.52 reserved for
exception
P11.53 Fire mode function
Group 13: Faults 59–62 (OT, F1-Er, F2-Er,
19 F3-Er)
Group 14: Faults 63–66 (C1-Er, C2-Er, C3-Er,
E-CAT)
Group 15: Faults 67–70 (E-BAC, E-DEV, S-Err,
OtE1)
Group 16: Faults 71–75 (OtE2, E-EIP, E-PAO,
E-AI1)
Group
Reserved, Reserved)
20
Group 18: Faults 79–82 (Reserved, Reserved,
Reserved, Reserved)
Group 19: Faults 83–86 (Reserved, Reserved,
Reserved, Reserved)
Group 20: Faults 87–90 (Reserved, Reserved,
Reserved, Reserved)
0–4
0: Run at the set frequency
1: Run at the output frequency at the time of
failure
2: Run at the upper limit frequency
3: Run at the lower limit frequency
4: Run at the frequency reserved for exception
0.00–630.00Hz
0–2
0: Disable
1: Fire mode 1
2: Fire mode 2
Note: When P11.53=0, the fire mode is invalid.
In this case, the VFD runs in normal mode and
stops when encountering a fault.
When the fire mode function is valid, the VFD
runs at the speed specified by P11.54.
In fire mode 1, the VFD keeps running except
when the VFD has been damaged.
In fire mode 2, the VFD keeps running, but
Description
17: Faults 75–78
-196-
Function parameter list
Default Modify
0x0000
(E-AI2, E-AI3,
0x0000
0.00 Hz
○
○
○
0
○
◎
0