Appletalk Cable-Range - Lucent Technologies Cajun P550 Cli Reference Manual

Avaya p550: reference guide

Hide thumbs Also See for Cajun P550:

Table of Contents

Configure an Appletalk Phase II for an interface. The no form of this command disables

Appletalk for this interface.

network.node

appletalk cable-range <cable-range>[<network.node>]

[no] appletalk cable-range

Table 3-5. Parameters, Keywords, Arguments

An optional parameter to indicate the range of the

Appletalk network values to be used on this

interface. Specify start and end values between 0 and

65279 and separate the values with a hyphen.

The starting network number must be less than the

ending network number. When cable-range is

omitted, the interface tries to configure the

Appletalk network and obtains its configuration

from another Appletalk router.

The AppleTalk network address to assign to the

interface. When network.node is omitted, the

Appletalk address defaults to 0.0.

• network - A 16-bit network number between 0

• node - An 8-bit node number between 0 and

Cajun P550/P220 Command Line Interface Reference Guide