* *
Display all management configured client ports for a given session in intelligent
multicasting.
Note: If a static session is created with ALL VLANs, then you must specify "VLAN all"
to see the clients. If a static session is created with an IP address, then you
cannot use the MAC address to see the clients.
To View:
Name
group-address
mac-address
vlan
Cajun>
IM Client
Port
----
3.2
Cajun P550/P220 Command Line Interface Reference Guide
show intelligent-multicast static-client
{<group-address>|mac-address < mac-address>} vlan
{all|<vlan-id>|name <vlan-name>}
Table 8-26. Parameters, Keywords, Arguments
Definition
The IP address of the multicast group.
The MAC address associated with this entry:
The choices are:
• all - The static session or client is created for all
VLANS.
• vlan-id - A session or client is created for a
specific VLAN only.
• name - A session or client is created for a specific
VLAN only.
show intelligent-multicast static-client 225.1.1.2 vlan all
Application
------------------
Mgmt : 225.1.1.2
MCAST
8-33