Network - Lucent Technologies Cajun P550 Cli Reference Manual



   " 
   
Specify a list of networks for the Routing Information Protocol (RIP) routing process.
The no form of this command removes an entry.

  
To Enable:
To Disable:
Name
ip-address
 
This example specifies that RIP is the routing protocol used on all interfaces connected to
network 111.0.4.5 and that RIP runs on subnet 255.0.0.0.
Cajun(configure router:rip)# network 111.0.4.5 255.0.0.0
Cajun P550/P220 Command Line Interface Reference Guide
network <ip-addr> [<subnet-mask>]
[no] network <ip-addr> [<subnet-mask>]
Table 2-9. Parameters, Keywords, Arguments
Definition
IP address of the network of directly connected
networks.
subnet-mask - mask of the network(s) on which
RIP should run.
IP-RIP
2-11