Set Port Flow-Control - Lucent Technologies Cajun P550 Cli Reference Manual

Port
 . * 


 
  
   
Set the port flow control.
Note: Setting this parameter on any M5548-100TX port (Tamale) sets all physical
ports on the module to the same value.
Command Syntax
To Enable:
Name
mod-num
12-22
set port flow-control {<mod-num>|<mod-port-range>}
[...,{<mod-num>|<mod-port-range>}]{disable|enable|enable
-receive-only|enable-send-only|
enable-with-aggressive-backoff}
Table 12-15. Parameters, Keywords, Arguments
Definition
Specifies the number of the module where the flow control
for each port on the module is to be set.
Cajun P550/P220 Command Line Interface Reference Guide