Logging
.
Configure the type of syslog messages sent to SNMP trap receivers. The no form of this
command disables the type specified. The default is:
[{start|system|config|temp|resource|fan|
service_port|user_port|auth_failure| bridge_stat|switch_fabric|protocol}]
To Enable:
To Disable:
Name
start|system...
|switch_fabric|protocol
Cajun(configure)# logging traps switch_fabric
7-8
logging traps [{start|system|config|temp|resource|
fan|service_port|user_port|auth_failure|
bridge_stat|switch_fabric|protocol}]
[no] logging traps [{start|system|config|temp|
resource|fan|service_port|user_port|auth_failure|
bridge_stat|switch_fabric|protocol}]
Table 7-6. Parameters, Keywords, Arguments
Definition
The types of syslog messages sent to SNMP trap
receivers.
Cajun P550/P220 Command Line Interface Reference Guide