Set Console Stopbits - Lucent Technologies Cajun P550 Cli Reference Manual

   .

 
  
   
Sets the serial console port stopbits to 1 or 2 bits wide. The default setting is 1.
Stopbits is not compatible with the serial console port configured in PPP mode. The stopbits
parameter cannot be accepted or saved when the serial console port is configured as PPP mode.
However, to configure the serial console port stopbits parameter, the serial console port can be
configued as TTY mode and the stopbits parameter set. The serial console port can then be
reconfigued as PPP mode. The stopbits parameter is saved until the console serial port is
reconfigured as TTY mode.

 
Name
1|2
 
This example sets the serial console port stopbits to 2 bits wide
Cajun(configure)# set console stopbits 2
Cajun P550/P220 Command Line Interface Reference Guide
To Enable:

set console stopbits {1|2}

Table 5-6. Parameters, Keywords, Arguments
Definition
A required parameter that indicates to the serial console
port the width of the stopbits. Stopbits is not compatible
with the serial console port configured in PPP mode.
Console
5-7