.' .*.*
Set the interpacket delay for RIP updates sent on a single interface. The no form of this
command results in no interpacket delay. The default state is enabled, which is a 55
millisecond delay.
Note: On the Cisco system this command takes a delay. On the Cajun system, it is a
Boolean.
Cajun(config-if:serial0)#
Cajun P550/P220 Command Line Interface Reference Guide
To Enable:
ipx output-rip-delay
To Disable:
[no] ipx output-rip-delay
ipx output-rip-delay
IPX
3-13