Set Port Name - Lucent Technologies Cajun P550 Cli Reference Manual

Port
 . 

 
  
   
Sets the name for a port.
Command Syntax
To Enable:
Name
mod-port-spec
port-name
 
This example sets the name of the seconds port on the module in slot 3 of a P550 and
P550R.
Cajun(configure)# set port name 3/2 "Really fast port"
Port name set: 3/2
12-26
set port name <mod-port-spec> [<port-name>]
Table 12-18. Parameters, Keywords, Arguments
Definition
Specifies a particular port by its module and port numbers.
Specifies the name to be assigned to the port. If a port
name is not specified, the name of the port is cleared.
Cajun P550/P220 Command Line Interface Reference Guide