Set Spantree Hello - Lucent Technologies Cajun P550 Cli Reference Manual

STAP
 .  

 
  
   
Set the bridge hello time for a particular bridge. The default time is 2 seconds.

 
To Enable:
Name
hellotime-value
802.1D
vlan-id
vlan-name
 
Cajun(configure)# set spantree hello 5 802.1D
Bridge Hello Time Successfully set to 5
15-6
set spantree hello <hellotime-value> {802.1D|vlan
{<vlan-id>|name <vlan-name>}}
Table 15-5. Parameters, Keywords, Arguments
Definition
The hello time value for the bridge, in seconds.
Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be
Configure a per-vlan or dual-layer bridge by using
the VLAN's vlan ID.
Note: VLAN bridges can only be modified
Configure a per-vlan or dual-layer bridge by using
the VLAN's name.
Note: VLAN bridges can only be modified
modified when in the IEEE config
mode.
when in per-vlan or dual-layer mode.
when in per-vlan or dual-layer mode.
Cajun P550/P220 Command Line Interface Reference Guide