3.5 Connecting the Cables
3.5.1 Connecting Cables to the GBICs
Once all Modules are installed, you are ready to connect fiber or copper cables to the GBICs in the OptiStar
EdgeSwitch Gigabit Ethernet Network Module and FCIP Network Module ports . Attach the appropriate cable
to the Single Mode Fiber GBIC (SC connector), Multimode Fiber GBIC (SC connector), HSSDC Copper GBIC
or DB-9 Copper GBIC. Connect the other end of the cable to the appropriate Fibre Channel or Gigabit Ethernet
device.
Figure 3-8: HSSDC Cable to HSSDC Copper GBIC
Figure 3-9: Multimode Fiber Cable to Multimode Fiber GBIC
Lucent Technologies
3 - 8
365-575-925R1.5
Issue 1, April 2002