Set Spantree Portpri - Lucent Technologies Cajun P550 Cli Reference Manual

STAP
 .  ..

 
  
   
Sets the port priority for a particular bridge port.
Command Syntax
To Enable:
Name
mod-port-range
priority-value
802.1D
vlan-id
vlan-name
15-14
set spantree portpri <mod-port-range> [... [,]
<mod-port-range>] <priority-value> {802.1D | vlan
{<vlan-id> | name <vlan-name>}}
Table 15-10. Parameters, Keywords, Arguments
Definition
Specifies the module and the port range.
The priority of the port, in hexidecimal. A two digit
hexidecimal value indicates the priority of the bridge
port. The higher the number, the lower the priority.
The default is 0x80 (in hexidecimal).
Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be
Configure a per-vlan or dual-layer bridge by using
the VLAN's vlan ID.
Note: LAN bridges can only be modified
Configure a per-vlan or dual-layer bridge by using
the VLAN's name.
Note: VLAN bridges can only be modified
modified when in the IEEE config
mode.
when in per-vlan or dual-layer mode.
when in per-vlan or dual-layer mode.
Cajun P550/P220 Command Line Interface Reference Guide