Ipx Send-Triggered-Updates - Lucent Technologies Cajun P550 Cli Reference Manual

IPX
.'  **.

    
   
Send RIP/SAP triggered updates on the IPX interface. Use the no form of this command
to disable triggered updates. The default state is enabled.

 
To Enable:
To Disable:
Name
rip|sap
 
Cajun(config-if:serial0)#
   
3-32
ipx send-triggered-updates {rip|sap}
[no] ipx send-triggered-updates {rip|sap}
Table 3-14. Parameters, Keywords, Arguments
Definition
Specify RIP or SAP.
ipx send-triggered-updates rip
Cajun P550/P220 Command Line Interface Reference Guide