Set Vlan - Lucent Technologies Cajun P550 Cli Reference Manual

VLAN
 

 
  
   
This command in its positive form creates or renames a VLAN with the specified
<vlan-id> and <vlan-name>. The command is interpreted as a creation command if the
<vlan-id> does not yet exist. If the <vlan-id> does exist the command is interpreted as a
rename command and the optional arguments, except the vlan name, are ignored.
In its negative form, this command deletes the vlan specified by the user.

 
To Enable:
To Disable:
Name
vlan-id
vlan-name (Optional in
create)
21-2
set vlan <vlan-id> [name <vlan-name>]
[autoincrement-HT-size {true|false}]
[init-HT-size <size>]
clear vlan {<vlan-id>|name <vlan-name>}
Table 21-1. Parameters, Keywords, Arguments
Definition
• If creating a VLAN, this command specifies the
VLAN's vlanID.
• If modifying the name, this command specifies
the VLAN to modify by its vlanID.
• In the negative form, it specifies the VLAN to
delete by its vlanID.
• If creating a VLAN, this command specifies the
name of the VLAN to create.
• If left blank, the system will attempt to create a
default name of the form VLANxxxx, where
xxxx is the <vlan-id> padded to four spaces. For
example the command "set vlan 10" would
attempt to create a VLAN with an ID of 10 and a
name of VLAN0010.
• In the negative syntax, this command specifies
the VLAN to delete by its name.
Cajun P550/P220 Command Line Interface Reference Guide