.'
Specify static Service Advertising Protocol (SAP) entries. To remove static SAP entries,
use the no form of this command. The default is that no static services are defined.
To Enable:
To Disable:
Name
service-type
service-name
network, node
socket
Cajun P550/P220 Command Line Interface Reference Guide
ipx service <service-type> <service-name> <network>
<node> <socket> <network.next-hop-node> <hops>
[no] ipx service <service-type> <service-name>
<network> <node> <socket> <network.next-hop-node>
<hops>
Table 3-15. Parameters, Keywords, Arguments
Definition
The number of the type of the service. The range is
0-FFFF.
Name of the server that provides the service. The
range is 1 to 47 bytes long.
Network number and node address of the server.
• The argument network is an eight-digit
hexadecimal number that uniquely identifies a
network cable segment. It can be a number in
the range 1 to FFFFFFFD. You do not need to
specify leading zeros in the network number. For
example, for the network number 000000AA
you can enter AA.
• The argument node is the node number of the
target Novell server. This is a 48-bit value
represented by a MAC address (aa:bb:cc:dd:ee:ff).
The socket number for this service. The range is 0 -
FFFF
IPX
3-33