Set Vlan - Lucent Technologies Cajun P550 Cli Reference Manual

VLAN
 

 
  
   
This command adds or removes one or more switch port[s] to or from the VLAN
specified by the user.
!    
The command is interpreted as a creation command if the <vlan-id> does not yet exist. If the
<vlan-id> does exist the command is interpreted as a rename command and the optional
arguments, if specified, are ignored. The two optional arguments for VLAN creation are:
1. autoincrement-HT-size: This argument specifies whether the AFT hash table associated
with this VLAN can grow when the table is full (defaults to TRUE).
2. init-HT-size: This argument specifies the initial hash table size. The table size specified
must be one of 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 or 8192 (defaults to 1024).

 
To Enable:
To Disable:
Name
vlan-id
vlan-name
mod-port-range
21-4
set vlan {<vlan-id>|name <vlan-name>}
<mod-port-range>[...,<mod-port-range>]
clear vlan {<vlan-id>|name <vlan-name>}
<mod-port-range>[...,<mod-port-range>]
Table 21-2. Parameters, Keywords, Arguments
Definition
Specifies the VLAN to add or remove ports to or from
by its VLAN ID.
Specifies the VLAN to add or remove ports to or from
by it's name.
Specifies a single switch port or range of switch ports
on a module to add or remove to or from the VLAN.
Cajun P550/P220 Command Line Interface Reference Guide