Default-Metric - Lucent Technologies Cajun P550 Cli Reference Manual

IP-RIP
 *

    
   
Set the default RIP route metric. The no form of this command restores the default. The
default state is: built-in, automatic metric translations, as appropriate for each routing
protocol.

  
Name
number
Sample Output
This example sets the default RIP metric value to 10.
Cajun (config-if:serial0) # default-metric 10
2-2
To Enable:
default-metric <number>
To Disable:
[no] default-metric
Table 2-1. Parameters, Keywords, Arguments
Definition
The default RIP route metric value. The
range is 0 to 15.
Cajun P550/P220 Command Line Interface Reference Guide