.'
**
Set the RIP/SAP send and receive characteristics of the IPX interface. The no form of this
command restores the default, which is talk-listen.
To Enable:
To Disable:
Name
rip|sap
Cajun(config-if:serial0)# ipx send-receive-mode rip talk-listen
Cajun P550/P220 Command Line Interface Reference Guide
ipx send-receive-mode {rip|sap} {talk-only|
listen-only|talk-listen}
[no] ipx send-receive-mode {rip|sap}
Table 3-13. Parameters, Keywords, Arguments
Definition
Specify RIP or SAP and indicate the send-receive
characteristic:
• talk-only - RIP or SAP only transmits updates
on the interface and does not receive them. Does
not send RIP or SAP requests.
• listen-only - RIP or SAP only receives updates
on the interface and does not transmit them.
• talk-listen - RIP or SAP transmits and receives
updates on the interface.
IPX
3-31