Set Intelligent-Multicast Client-Port-Pruning Time - Lucent Technologies Cajun P550 Cli Reference Manual

MCAST
   *  *.*.   

 
  
   
Enable, disable or set client port pruning interval for intelligent multicasting. Intelligent multicast
client port pruning removes any multicast client port from configuration that has been determined
to be inactive for a specified amount of time. The value range is from 1 minute to 1440 minutes
(24 hours) and the the default time is 60 minutes. The default state of this command is disabled.

 
To Enable:
Name
minutes
 
This example sets the intelligent-multicast port pruning time to 45 minutes.
Cajun(configure)# set intelligent-multicast client-port-pruning
time 45
Client Port Pruning Time successfully set to 45 minutes
8-14

set intelligent-multicast client-port-pruning time

{<minutes>}
Table 8-11. Parameters, Keywords, Arguments
Definition
The number of minutes that a dynamic intelligent
multicast client port must be inactive before it is pruned by
the intelligent multicast functionality.
Cajun P550/P220 Command Line Interface Reference Guide