Set Intelligent-Multicast Static-Client-Port - Lucent Technologies Cajun P550 Cli Reference Manual

   * * *.

 
  
   
Create management client ports for Intelligent Multicasting.

 
To Enable:
Name
group-address
mac-address
vlan
port
 
This example sets an intelligent-multicast static-client-port.
Cajun(configure)# set intelligent-multicast static-client-port
229.10.10.10 vlan 4 port 3/11
Multicast Client successfully created
Cajun P550/P220 Command Line Interface Reference Guide

set intelligent-multicast static-client-port

{<group-address>|mac-address <mac-address>} vlan
{all|<vlan-id>|name <vlan-name>} port <mod-port-spec>
Table 8-18. Parameters, Keywords, Arguments
Definition
The multicast IP address of a static multicast session
The multicast MAC Address of a static non-IP
multicast session.
The keyword for per VLAN commands.
• all|vlan-id - all VLANS or the VLAN ID of a
static multicast session.
• name|vlan-name - The name of a VLAN of a
static multicast session.
The client port in the multicast session.
<mod-port-spec> is the port specifier for the static
multicast client.
MCAST
8-21