Show Appletalk Static Cable-Range - Lucent Technologies Cajun P550 Cli Reference Manual

  ..  * 

   
   
Display the static routes that are configured for Appletalk.

 
To Enable:
Name
starting-range
 
Cajun# show appletalk static cable-range
AppleTalk StaticRoute Table
Start-End
9000-9001
   
Cajun P550/P220 Command Line Interface Reference Guide
show appletalk static cable-range [<starting-range>]
Table 3-17. Parameters, Keywords, Arguments
Definition
If the starting range is supplied, the entry
corresponding to this specific static route is
displayed; otherwise, the entire routing table is
displayed.
Next Hop Metric
350.50 1
State Owner Interface
Good Static at_if1
Appletalk
3-27