Ip Ospf Cost - Lucent Technologies Cajun P550 Cli Reference Manual

OSPF
. . 

    
   
Explicitly specify the cost of sending a packet on an interface. The no form of this
command sets the cost to default value of 1.
Command Syntax
Name
cost
10-16
To Enable:
ip ospf cost <cost>
To Disable:
[no] ip ospf cost <cost>
Table 10-11. Parameters, Keywords, Arguments
Definition
Unsigned integer value expressed as the link state
metric. It can be a value in the range 1 to 65535.
Cajun P550/P220 Command Line Interface Reference Guide