. .
*
Configure the host address used in DVMRP prune packets forwarded on this interface.
The no form of this command restores the default, which is: host-addr.
To Enable:
To Disable:
Name
host-addr
network-addr
Cajun P550/P220 Command Line Interface Reference Guide
ip multicast prune-source {host-addr|network-addr}
[no] ip multicast prune-source
Table 6-12. Parameters, Keywords, Arguments
Definition
Enter the host address. The full host address goes
into the prune packet for the source address.
Enter the network address. Only the network
portion of the address goes into the packet.
DVMRP
6-17