Port
456 .
Set or clear port mirroring configuration for a specific source port or range.
To Enable:
To Disable:
Name
mod-port-range
mod-port-spec
mirror-port
piggyback-port
12-6
set port mirror <mod-port-range> source-port
<mod-port-range> mirror-port <mod-port-spec> sampling
{always | disable | periodic } [max-packets-sec
<max-packets-sec-value>] [piggyback-port
<mod-port-spec>]
clear port mirror <mod-port-range>
Table 12-3. Parameters, Keywords, Arguments
Definition
Specifies a mirror port range. The first
mod-port-range in the command string is the port
mirror rule identifier. It should be the physical port
range for the rules associated fabric port. The
source-port mod-port-range is the single port or the
complete physical port range for the fabric port
under investigation.
Specifies a particular port.
Port from which you want to send the traffic. This
port can be on another module in the switch.
The port that is used for bi-directional port
mirroring. The specified port is unavailable for other
uses.
Cajun P550/P220 Command Line Interface Reference Guide