Legacy-Cli - Lucent Technologies Cajun P550 Cli Reference Manual

UI
 *

   
   
Enter the Cajun 3.0 and older CLI.
Note: Only those commands in Release 3.1 or higher are in the Cajun 4.0 release.

 
 
Cajun> legacy-cli
*** Entering Legacy CLI mode ***
To set or change console IP Address/Mask/Default Gateway run setup
command.
Cajun> ?
community
console
download
event
.
.
.
Cajun> exit
*** Returning to Normal CLI mode ***
20-10
To Enable:

legacy-cli

SNMP Community configuration
Console configuration
TFTP code image download
Event Table display
Cajun P550/P220 Command Line Interface Reference Guide