Ip Dvmrp Prune-Message-Lifetime - Lucent Technologies Cajun P550 Cli Reference Manual

DVMRP
. . . ** 

   "#
   
Set the DVMRP prune message lifetime. Use the no form of this command to return to
the default value of 7200 seconds.

 
To Enable:
To Disable:
Name
prune-lifetime
  
This example configures the ip dvmrp prune message lifetime for fifteen hundred
seconds.
Cajun(configure router:dvmrp)# ip dvmrp prune-message-lifetime ?
<prune-lifetime> - Prune message lifetime (100-7200) sec
Cajun(configure router:dvmrp)# ip dvmrp prune-message-lifetime
1500
   
6-10
ip dvmrp prune-message-lifetime <prune-lifetime>
[no] ip dvmrp prune-message-lifetime
Table 6-7. Parameters, Keywords, Arguments
Definition
The DVMRP upstream prune message lifetime. The
message lifetime is measured in seconds. The range is
100-7200 seconds.
Cajun P550/P220 Command Line Interface Reference Guide