Set Intelligent-Multicast Static-Session - Lucent Technologies Cajun P550 Cli Reference Manual

   * *

 
  
   
Create management sessions for intelligent multicasting.

 
To Enable:
To Disable:
Name
group-address
mac-address
vlan
port
 
This example sets an intelligent-multicast static session.
Cajun(configure)# set intelligent-multicast static-session
229.10.10.10 vlan name adams
Cajun P550/P220 Command Line Interface Reference Guide

set intelligent-multicast static-session

{<group-address>|mac-address <mac-address>} vlan
{all|<vlan-id>|name <vlan-name>}
clear intelligent-multicast static-session
{<group-address>|mac-address <mac-address>} vlan
{all|<vlan-id>|name <vlan-name>}
Table 8-20. Parameters, Keywords, Arguments
Definition
The multicast IP address of the multicast session.
The multicast MAC address of the non-IP multicast
session.
The keyword for per VLAN commands.
• all|vlan-id - all VLANS or the VLAN ID of the
VLAN where the multicast session is to be
created.
• name|vlan-name - The name of the VLAN on
which the multicast session should be created.
The port in the multicast session. <mod-port-spec>
specifies a particular port or a range of ports on a
module.
MCAST
8-23