Ip Ospf Hello-Interval - Lucent Technologies Cajun P550 Cli Reference Manual

. * 
.

    
   
Specify the interval between hello packets that the router sends on the interface.
Command Syntax
Name
seconds
Cajun P550/P220 Command Line Interface Reference Guide
To Enable:
ip ospf hello-interval <seconds>
To Disable:
[no] ip ospf hello-interval
Table 10-14. Parameters, Keywords, Arguments
Definition
Unsigned integer that specifies the interval in
seconds. The value must be the same for all nodes on
a specific network. The no form of this command
sets the hello interval to default value of 10 seconds.
OSPF
10-19