Ip Ospf Dead-Interval - Lucent Technologies Cajun P550 Cli Reference Manual

. * 
.

    
   
Set how long hello packets must not have been seen before its neighbors declare the
router down. To return to the default time, use the no form of this command.
Command Syntax
To Enable:
To Disable:
Name
seconds
Cajun P550/P220 Command Line Interface Reference Guide
ip ospf dead-interval <seconds>
[no] ip ospf dead-interval
Table 10-12. Parameters, Keywords, Arguments
Definition
Time in seconds of how long hello packets must be
unseen before the neighbor declares the router
down.
OSPF
10-17