Set Port Pace-Priority-Mode - Lucent Technologies Cajun P550 Cli Reference Manual

 . .*. *


 
  
   
Enable or disable pace priority mode on a specified port or ports.
Command Syntax
To Enable:
Name
mod-num
mod-port-range
disable|enable
 
This example enables the pace priority mode on all the ports on the module in slot 3 and
ports 7 through 11 on the module in slot 5 of a Cajun P550 or P550R.
Cajun(configure)# set port pace-priority-mode 3,5/7-11 enable
Port pace priority enable set: 3/1,3/2,5/7,5/8,5/9,5/10,5/11
This example disables the pace priority mode on the Cajun P220 fast ethernet switch
ports 7 through 11, the P220 G1 gigabit port, and the P220 expansion/auxiliary module
ports A2 through A4.
Cajun(configure)# set port pace-priority-mode 7-11,G1,A2-A4
disable
Port pace priority disable set: 7,8,9,10,11,G1,A2,A3,A4
Cajun P550/P220 Command Line Interface Reference Guide
set port pace-priority-mode {<mod-num>|<mod-port-range>}
[...,{<mod-num>|<mod-port-range>}]{disable|enable}
Table 12-19. Parameters, Keywords, Arguments
Definition
Specifies a module number where pace priority mode is
enabled or disabled for every port on the module.
Specifies a range of ports where pace priority mode is
enabled or disabled.
Enables or disables pace priority for the specified ports.
Port
12-27