Set Console Flowcontrol - Lucent Technologies Cajun P550 Cli Reference Manual

Console
    

 
  
   
Sets the flow control type for the serial console port. The default for both TTY and PPP is
xon/xoff.

 
To Enable:
Name
none|xon/xoff
 
This example sets the console flow control to none.
Cajun(configure)# set console flowcontrol none
5-4
set console flowcontrol {none|xon/xoff}
Table 5-3. Parameters, Keywords, Arguments
Definition
This is a required parameter. Indicates either the lack of
use of flow control, or that the software based xon/xoff
flow control is in use.
Equivalent to the Cajun CLI command: console flowctrl
[none | xon/xoff]
Cajun P550/P220 Command Line Interface Reference Guide