IP
.
*
Specify the format of netmasks in the show command output. The no form of this
command restores the default, which is a dotted decimal format.
To Enable:
To Disable:
Name
bitcount|decimal|
hexadecimal
This example displays netmasks in bitcount format.
Cajun(configure)# ip netmask-format bitcount
1-18
ip netmask-format {bitcount|decimal|hexadecimal}
[no] ip netmask-format {bitcount|decimal|hexadecimal}
Table 1-13. Parameters, Keywords, Arguments
Definition
The keywords are:
• bitcount - Addresses are followed by a slash
and the total number of bits in the netmask.
For example, 131.108.11.0/24 indicates the
netmask is 24 bits.
• decimal - The network masks are in dotted
decimal notation. For example,
255.255.255.0.
• hexadecimal - The network masks are in
hexadecimal format as indicated by the
leading 0X. For example, 0XFFFFFF00.
Cajun P550/P220 Command Line Interface Reference Guide