MCAST
* *
*.
Remove the specified static or management clients ports from Intelligent Multicast.
To Enable:
Name
group-address
mac-address
vlan
port
This example clears static client ports from intelligent multicast .
Cajun(configure)# clear intelligent-multicast static-client-port
225.1.1.2 vlan all port 3/2
Multicast Client successfully destroyed
%%&
8-8
clear intelligent-multicast static-client-port
{<group-address>|mac-address <mac-address>} vlan {
all|<vlan-id>|name <vlan-name>} port <p220-port-spec>
Table 8-5. Parameters, Keywords, Arguments
Definition
The IP address of the multicast group.
The MAC address associated with this entry:
The keyword for per VLAN commands.
• all|vlan-id - all VLANS or the numerical ID of a
specific VLAN.
• vlan-name - The ID of the vlan. The keyword
for the VLAN name.
The port in the multicast session. <p220-port-spec>
specifies a particular port or a range of ports on a
module.
Cajun P550/P220 Command Line Interface Reference Guide