STAP
.
Display one or all spanning trees.
To View:
Name
all
802.1D
vlan-id
name
Cajun> show spantree all
Name/Vlan
TopChngs
Default
15-18
show spantree {all|802.1D|vlan{<vlan-id>|name
<vlan-name>}}
Table 15-13. Parameters, Keywords, Arguments
Definition
Display all the bridges in configuration mode.
Indicates an 802.1D bridge which can only be
displayed in 802.1D Config Mode.
Configure a per-vlan or dual-layer bridge by using
the VLAN's vlan ID. VLAN bridges can only be
viewed when in per-vlan or dual-layer mode.
vlan-name - Configure a per-vlan or dual-layer
bridge by using the VLAN's name. VLAN bridges can
only be viewed when in per-vlan or dual-layer
mode.
Status
RootPrt
Enabled
0
BridgeId = 0x800002E03BDDF400
DesignatedRoot = 0x800002E03BDDF400
Time Since Topology Change (hh:mm:ss) = 00:25:36
• IEEE mode - Shows only the 802.1D bridge.
• per-vlan or dual-layer mode - Shows all of the
VLAN bridges.
RootCst
MaxAge
0
20
Cajun P550/P220 Command Line Interface Reference Guide
HelloTime
FwdDly
2
15
0