Ip Dvmrp Neighbor-Probe-Interval - Lucent Technologies Cajun P550 Cli Reference Manual

DVMRP
. .  *.* 

   "#
   
Set the DVMRP neighbor probe interval. Use the no form of this command to return to
the default value of 10 seconds.

 
To Enable:
To Disable:
Name
neighbor-probe
  
This example configures the ip dvmrp neighbor probe interval for eleven seconds.
Cajun(configure router:dvmrp)# ip dvmrp neighbor-probe-interval ?
Cajun(configure router:dvmrp)# ip dvmrp neighbor-probe-interval 11
   
6-8

ip dvmrp neighbor-probe-interval

<neighbor-probe>
[no] ip dvmrp neighbor-probe-interval
Table 6-5. Parameters, Keywords, Arguments
Definition
The DVMRP neighbor probe interval, which is
measured in seconds. The range is 5-45 seconds.
<neighbor-probe> - Neighbor probe interval (5-45) sec
Cajun P550/P220 Command Line Interface Reference Guide