Set Port Known-Mode - Lucent Technologies Cajun P550 Cli Reference Manual

 .  *

 
  
   
Enable or disable the known mode for a specified switch port.
Command Syntax
To Enable:
Name
mod-num
mod-port-range
disable|enable
 
This example enables the known mode for the seconds switch port on the module in slot
3 and switch ports 7 through 11 on the module in slot 5 of a Cajun P550 or P550R.
Cajun(configure)# set port known-mode 3/2,5/7-11 enable
Port known-mode set: 3/2,5/7,5/8,5/9,5/10,5/11
This example disables the known mode for the Cajun P220 fast ethernet switch ports 7
through 11, the Cajun P220 G1 gigabit port, and the Cajun P220 expansion/auxiliary
module ports A2 through A4.
Cajun(configure)# set port known-mode 7-11,G1,A2-A4 disable
Port known-mode set: 7,8,9,10,11,G1,A2,A3,A4
Cajun P550/P220 Command Line Interface Reference Guide
set port known-mode {<mod-num>|<mod-swport-range>}
[...,{<mod-num>|<mod-swport-range>}]
{disable|enable}
Table 12-17. Parameters, Keywords, Arguments
Definition
Specifies the number of the module where the known
mode of every switch port is enabled or disabled.
Specifies a range of switch ports whose known mode is to
be enabled or disabled.
Enable or disable the known mode for the specified switch
ports.
Port
12-25