Copy - Lucent Technologies Cajun P550 Cli Reference Manual

System
.

    
   
Copy a specified file in NVRAM to another specified file in NVRAM.

 
To Enable:
Name
source filename
dest filename
 
This example shows the copy <source filename> <dest filename> command.
Cajun# copy ripcfg.txt test.txt
Copied file '/nvram/ripcfg.txt' to file '/nvram/test.txt'
18-4
copy <source filename> <dest filename>
Table 18-2. Parameters, Keywords, Arguments
Definition
The name of the source file in NVRAM. It must be an
ASCII script file, with a 1-8 letter base filename, and
file extension of ".txt"
The name of the destination file in NVRAM. It must
be an ASCII script file, with a 1-8 letter base
filename, and file extension of ".txt"
Cajun P550/P220 Command Line Interface Reference Guide