Set Console Databits - Lucent Technologies Cajun P550 Cli Reference Manual

   

 
  
   
Set the databit width for the console serial port. The default value is 8.
This command is not applicable when the console serial port is configured in PPP mode. The
input will not be accepted or stored when the console serial port is configured in PPP mode.
However, if the console serial port is configured as TTY mode and the databits width is
configured, the console serial port can be changed to PPP mode and the databit width is saved
until TTY mode is restored.

 
Name
7|8
 
This example sets the databit width for the console serial port to 7.
Cajun(configure)# set console databits 7
Cajun P550/P220 Command Line Interface Reference Guide
To Enable:

set console databits {7|8}

Table 5-2. Parameters, Keywords, Arguments
Definition
This is a required parameter. The number indicates the
number of bits used in the data stream.
Console
5-3