* *.
Create or remove management multicast router ports for intelligent multicasting. If a specific
VLAN is indicated, a multicast router will only be created on those VLANs to which the port is
bound. The default state is disabled.
To Enable:
To Disable:
Name
all
name
port
This example adds a multicast router port.
Cajun(configure)# set intelligent-multicast router-port vlan all
port 3/4
Multicast Router Port successfully added
Cajun P550/P220 Command Line Interface Reference Guide
set intelligent-multicast router-port vlan {all|
<vlan-id>|name <vlan-name>} port <mod-port-spec>
clear intelligent-multicast router-port vlan {all|
<vlan-id>|name <vlan-name>} port <mod-port-spec>
Table 8-12. Parameters, Keywords, Arguments
Definition
Configure all router ports for intelligent multicasting.
The <vlan-id> of the VLAN on which the Multicast
Router should be created or removed.
The keyword for the VLAN name. The <vlan-name>
is the name of the VLAN on which the Multicast
Router should be created or removed.
The port in the multicast session. <mod-port-spec>
is the port specifier of the Multicast Router.
MCAST
8-15