SNMP
.*
To set the system contact string, use the snmp-server contact global configuration command. Use
the no form of this command to remove the system contact information. The default setting for
community string access is read-only (ro).
To Enable:
To Disable:
Name
string
Cajun> snmp-server community rw_public rw normal
14-16
snmp-server contact <string>
[no] snmp-server contact <string>
Table 14-12. Parameters, Keywords, Arguments
Definition
A string that describes the system contact
information.
Cajun P550/P220 Command Line Interface Reference Guide