Ip Ospf Transmit-Delay - Lucent Technologies Cajun P550 Cli Reference Manual

.  *
.

    
   
Set the estimated time it takes to transmit a link state update packet on the interface. To
return to the default value, use the no form of this command.
Command Syntax
To Enable:
To Disable:
Name
seconds
Cajun P550/P220 Command Line Interface Reference Guide
ip ospf transmit-delay <seconds>
[no] ip ospf transmit-delay
Table 10-20. Parameters, Keywords, Arguments
Definition
Time in seconds that it takes to transmit a link state
update.The range is 1 to 65535 seconds. The default
is 1 second.
OSPF
10-27