Ipx Route - Lucent Technologies Cajun P550 Cli Reference Manual

IPX
.' 

 
  
   
Add a static route to the routing table. The no form of this command removes a route
from the routing table.
Command Syntax
To Enable:
To Disable:
Name
network|default
network next-hop-node
ticks
hops
3-20
ipx route {<network>|default} <network.next-hop-node>
[<ticks> [<hops>]]
[no] ipx route {<network>|default}
<network.next-hop-node>
Table 3-8. Parameters, Keywords, Arguments
Definition
• network - an eight-digit hexadecimal number
that identifies the network on which you are
establishing a static route.
The range is 1 to FFFFFFFD and leading zeros can
be omitted (for 000000BB, enter BB).
• default - creates a static entry for the
default-route.
Network number and node address of the next hop
to the server.
• next-hop-node - The argument node is the
node number of the target Novell server. This is a
48-bit value represented by a MAC address
(aa:bb:cc:dd:ee:ff).
Number of IBM clock ticks of delay to the network
for which you are establishing a static route. The
range is 1 to 32000.
Number of hops to the network for which you are
establishing a static route. The range is 1 to 16.
Cajun P550/P220 Command Line Interface Reference Guide