Clear Ipx Route - Lucent Technologies Cajun P550 Cli Reference Manual

 .' 

 
  
   
Delete routes from the IPX routing table. This command only deletes routes learned via
the RIP routing protocol. Static and local routes cannot be deleted using this command.

 
To Enable:
Name
{network|default|*}
 
This example clears the entry for network 5 from the IPX routing table.
Cajun(configure)# clear ip route 5
System Supported: P550R
Cajun P550/P220 Command Line Interface Reference Guide
clear ipx route {<network> default|*}
Table 3-1. Parameters, Keywords, Arguments
Definition
Delete routes learned via the RIP routing protocol
from the IPX routing table.
• network - The number of the network whose
routing table entry you want to display. This is an
eight-digit hexadecimal number that uniquely
identifies a network cable segment. It can be a
number in the range 1 to FFFFFFFD. You do not
need to specify leading zeros in the network
number. For example, for the network number
000000AA, you can enter AA.
• default - deletes the default route from the
routing table.
• * - Deletes all routes in the routing table.
IPX
3-3