.' .*
*
Specify which services (by network) are present in SAP packets sent and received on the
interface. The no form of this command removes the filter from an interface.
To Enable:
To Disable:
Name
precedence
filter-network
service-type
outbound|inbound| both
Cajun P550/P220 Command Line Interface Reference Guide
ipx sap-network-filter <precedence> <filter-network>
<service-type> {outbound|inbound | both}
{filter|allow} [<filter-hops>]
[no] ipx sap-network-filter <precedence>
Table 3-12. Parameters, Keywords, Arguments
Definition
A number indicating the precedence of this SAP
name filter in relation to other SAP name filters on
this interface. Lower numbers indicate a higher
precedence. The range is 0-9999.
The network of the service that this filter matches.
The range is 0 - FFFFFFFF where, FFFFFFFF
matches all networks.
The type of the IPX SAP service, in hexadecimal. The
range is 0 - FFFF where, FFFF matches all service
types.
The filter direction.
• outbound - Apply filter to SAP packets sent out
the interface.
• inbound - Apply filter to SAP packets received
on the interface.
• both - Apply filter to SAP packets in both
directions.
IPX
3-29