Set Port Auto-Negotiation - Lucent Technologies Cajun P550 Cli Reference Manual

Port
 . * 

 
  
   
Use the set port auto-negotiation command to enable or disable auto negotiation on the
specified port or ports.

 
To Enable:
Name
mod-num
mod-port-range
disable|enable
 
This example enables auto negotiation for the second fast ethernet port and ports 7
through 11 on the module in slot 5 of a Cajun P550 or P550R.
Cajun(configure)# set port auto-negotiation 5/2,5/7-11 enable
Port auto-negotiation enable set: 5/2,5/7,5/8,5/9,5/10,5/11
This example disables auto negotiation for the P220 fast ethernet switch ports 7-11, and
the P220 expansion/auxiliary module ports A2 through A4.
Cajun(configure)# set port auto-negotiation 7-11,A2-A4 disable
Port auto-negotiation disable set: 7,8,9,10,11,A2,A3,A4
12-10

set port auto-negotiation

{<mod-num>|<mod-port-range>}[...,{<mod-num>|
<mod-port-range>}]{disable | enable}
Table 12-6. Parameters, Keywords, Arguments
Definition
Specifies a module number where auto negotiation
for every fast ethernet port on that module is
enabled or disabled.
Specifies a range of fast ethernet ports whose ability
for auto negotiation is enabled or disabled.
Disable or enable port auto negotiation.
Cajun P550/P220 Command Line Interface Reference Guide