Set Port Vtp-Snooping - Lucent Technologies Cajun P550 Cli Reference Manual

 . .* . 

 
  
   
Disable or enable vtp-snooping for specified switch ports. The default state is disabled.
Command Syntax
To Enable:
Name
mod-num
mod-swport-range
disable|enable
 
This example enables the vtp-snooping option for the second switch port on the module
in slot 3 and switch ports 7 through 11 on the module in slot 5 of a Cajun P550 or
P550R.
Cajun(configure)# set port vtp-snooping 3/2,5/7-11 enable
Port vtp-snooping set: 3/2,5/7,5/8,5/9,5/10,5/11.
This example disables the vtp-snooping option for the Cajun P220 fast ethernet switch
ports 7 through 11, the Cajun P220 G1 gigabit port, and the Cajun
P220expansion/auxiliary module ports A2 through A4.
Cajun(configure)# set port vtp-snooping 7-11,G1,A2-A4 disable
Port vtp-snooping set: 7,8,9,10,11,G1,A2,A3,A4.
Cajun P550/P220 Command Line Interface Reference Guide
set port vtp-snooping {<mod-num>|<mod-swport-range>}
[...,{<mod-num>|<mod-swport-range>}]{disable|enable}
Table 12-29. Parameters, Keywords, Arguments
Definition
Specifies the number of the module. (Valid only on P550
and P550R switches).
Specifies a particular port or a range of ports on a
module whose vtp-snooping is to be enabled or
disabled.
Disables or enables vtp-snooping for specific switch ports.
Port
12-39