Set Port Category - Lucent Technologies Cajun P550 Cli Reference Manual

Port
 . 

 
  
   
Sets the category of ports.
Command Syntax
To Enable:
Name
mod-num
mod-port-range
service-port|
user-port
 
This example sets the category of all the ports on the module in slot 3 and ports 7
through 11 on the module in slot 5 of a Cajun P550 or P550R as user ports.
Cajun(configure)# set port category 3,5/7-11 user-port
Port category set: 3/1,3/2,5/7,5/8,5/9,5/10,5,11
This example sets the category for the P220 fast ethernet switch ports 7 through 11, the
Cajun P220 G1 gigabit port, and the Cajun P220 expansion/auxiliary module ports A2
through A4 as service ports.
Cajun(configure)# set port category 7-11,G1,A2-A4 service-port
Port category set: 7,8,9,10,11,G1,A2,A3,A4
12-16
set port category {<mod-num>|<mod-port-range>}
[...,{<mod-num>|<mod-port-range>}]{service-port |
user-port}
Table 12-10. Parameters, Keywords, Arguments
Definition
Specifies the number of the module where the port
category type of every module is set.
Specifies a range of ports whose category is to be set.
• service-port - Indicates that the specified ports
are set as service ports and intended for
connections to servers or other switches.
• user-port - Indicates that the specified ports are
set as user ports and intended for connections to
end user nodes.
Cajun P550/P220 Command Line Interface Reference Guide